325iX buyers guide

How-to's, guides, specs and information specific to the 325ix

325iX buyers guide

Postby ejohnson » Fri Sep 03, 2010 7:45 pm

Looking at picking up one of BMWs greatest AWD sports car? well there are a few things you should know about them while you are looking. First, here is a little background info/specs on the car


Now when you go to look at your very first iX. First thing is first, look at the front CV boots. Are they torn? If so, talk the price down alot... new shafts can be upwards of $1000 each, the cv joint could be fine, but its your chance to get the price down some more. If the boots are good, then you should be good to go on that part. The front diff is pretty hard to break, so dont worry about that one. Control arms and steering racks are iX only parts, so check them for wear and adjust price as needed.

Next, look at the tires, are they the same size? If they are not the same sized tires, walk away right there. There is a good chance the t-case will be damaged due to wheels turning at different speeds for a extended time. Wheels, for the iX only work on the iX, but 2wd wheels will work on the awd cars (offsets and what not)

You may want to check to see if the t-case works. In order to do that you need to jack up the rear of the car with a floor jack. Make sure your on a flat clear surface. Jack the car by the rear diff (with a block of wood) and slowly try to drive forward with just the front wheels on the ground. Here is a video to show you how. http://www.youtube.com/watch?v=a4exvt2_Yjc

Rust!! this is the leading cause of iX death.. since they are awd most people use them in northern areas that use salt. Common places that these thing will rust are:
front fenders under the wheel flares
front and rear jack pads
rear battery tray
rear corner of door jam
lisence plate lights
rear most part of pop out windows

That is about all I can think of right now, but would like to tell you right off the bat, a iX that needs work will cost you big time to repair. A iX that doesnt need any work will cost alot less over the years... you can catch any problems before they become a big issue.
Posts: 5
Joined: Fri Sep 03, 2010 7:06 pm
Location: Minnesnowta

Re: 325iX buyers guide

Postby hassmaschine » Tue Sep 07, 2010 6:20 pm

It might be worth hosting those scans here. strictlyeta is pretty reliable, but we don't want to steal bandwidth and who knows if it will always be around. :) I have copies of them somewhere..

Site Admin
Posts: 40
Joined: Sat Aug 14, 2010 9:34 pm

Return to 325ix Tech Articles

Who is online

Users browsing this forum: No registered users and 1 guest